Product: Instant Digital Download (PDF)
Diagnose charging-port connection and electric-lock faults using the OEM diagnostic procedures for EU Standard 7kW and 11kW charging configurations, including CC signal diagnosis, charging-port lock/unlock circuits, wiring checks, charging-source checks, controller software diagnosis and configuration-specific terminal testing.
Years Covered:
2022, 2023, 2024, 2025
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD, EU Standard 7kW or EU Standard 11kW charging configuration
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, Left-Hand Drive (LHD) variants, and non-EU charging-port configurations.
DTCs Covered
- P268D00 — Inconsistent AC Gun Connection Signal
- P157897 — Abnormal CC Signal
- P157E11 — Charging Connection Signal External Short to Ground
- P157E12 — Charging Connection Signal External Short Circuit to Power Supply
- P158A00 — Electric Lock Fault
Diagnostic Coverage
- OEM high-voltage and charging-system safety precautions
- EU Standard 7kW and 11kW configuration-specific diagnosis
- VDS fault-code confirmation, clearing and recheck
- Intermittent/sporadic fault diagnosis
- P268D00 AC charging-gun connection-signal diagnosis
- P157897 charging connection confirmation / CC signal diagnosis
- P157E11 charging-connection signal short-to-ground diagnosis
- P157E12 charging-connection signal short-to-power diagnosis
- P158A00 charging-port electric-lock diagnosis
- EU Standard 7kW CC terminal: B53-3
- EU Standard 11kW CC terminal: B53_3-12
- Integrated intelligent front-wheel drive controller CC terminal: BK45(B)-30
- EU Standard 7kW lock/unlock circuits: B53-4 / B53-5
- EU Standard 11kW lock/unlock circuits: B53_3-15 / B53_3-16
- Left body domain controller lock/unlock circuits: KG64(D)-13 / KG64(D)-12
- Charging-port lock-status circuit coverage
- Short-to-ground testing: > 10 kΩ
- Short-to-power testing: > 10 kΩ
- Charging-port-to-controller continuity testing: < 1 Ω
- Charging-port connector and wiring-harness inspection
- AC charging-source checks
- AC/DC charging-port inspection for dirt, burn marks and poor contact
- Integrated intelligent front-wheel drive controller software check/recheck
- Left body domain controller software check/recheck
- Wiring-harness repair/replacement decision paths
- Charging-port repair/replacement paths where applicable
- OEM-directed controller replacement where the applicable DTC remains
- Exact configuration-specific OEM connector identification for the 7kW and 11kW electric-lock and CC circuits
Included Links to OEM Source Material
Reference links are provided within the guide for:
- Complete OEM Diagnostic Manual
- Electronic Wiring Diagram
- Repair Manual
The linked OEM source documents are separate reference resources and are not included with this Diagnostic Guide.