BYD ATTO 3 / Yuan Plus: C12F909 C055E00 C05B001 C2A1700 Brake Hydraulic Leakage & Air OEM Diagnostic Guide BYD ATTO 3 / Yuan Plus: C12F909 C055E00 C05B001 C2A1700 Brake Hydraulic Leakage & Air OEM Diagnostic Guide BYD ATTO 3 / Yuan Plus: C12F909 C055E00 C05B001 C2A1700 Brake Hydraulic Leakage & Air OEM Diagnostic Guide

BYD ATTO 3 / Yuan Plus: C12F909 C055E00 C05B001 C2A1700 Brake Hydraulic Leakage & Air OEM Diagnostic Guide

diagnostic guides PDF #6264

0 Reviews | Purchase Below *

$25 USD

Visa Mastercard American Express Apple Pay

OEM diagnostic guide for 2022–2025 BYD ATTO 3 / Yuan Plus RHD EV covering C12F909, C055E00, C05B001 and C2A1700 brake hydraulic circuit blockage, brake-line leakage, entrained-air and excessive-compensation faults, with VDS diagnosis, hydraulic-line inspection, air removal and OEM pressure verification. Click To Read More


There are no reviews yet.

Product: Instant Digital Download (PDF)

Diagnose BYD ATTO 3 / Yuan Plus brake hydraulic circuit blockage, leakage and air-related faults using OEM procedures for electro-hydraulic DTC confirmation, brake-line inspection, air removal, hydraulic pressure verification and Intelligent Power Braking Controller fault isolation.

Years Covered:
2022, 2023, 2024, 2025

Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD

Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.

DTCs Covered

  1. C12F909 — Brake Hydraulic Circuit Blockage
  2. C055E00 — Leakage in Brake Hydraulic Circuit A
  3. C05B001 — Leakage in Braking Hydraulic L1 Circuit
  4. C2A1700 — Excessive Compensation in Braking Hydraulic L1 Circuit (Air Present)

Diagnostic Coverage

  • OEM brake hydraulic and electro-hydraulic diagnostic precautions
  • VDS electro-hydraulic braking DTC confirmation, clearing and recheck
  • OEM intermittent sporadic-fault procedure
  • Brake hydraulic circuit blockage diagnosis
  • Brake-line and braking-pipeline leakage inspection
  • Entrained-air diagnosis
  • Intelligent Power Braking Controller pressure-sensor fault isolation
  • Actual hydraulic pressure versus set-pressure deviation diagnosis
  • Brake-line repair or replacement decision paths
  • Intelligent Power Braking System air-removal procedure
  • Offline exhaust operation
  • Residual-air verification
  • 15-second stabilization period after re-ignition with no braking-related actions
  • Brake-pedal pressure application to approximately 78 bar
  • 2-second pressure hold
  • Post-procedure fault recurrence check
  • OEM DECISION and FINAL DECISION paths
  • OEM normal-system conclusion where the fault does not recur
  • Intelligent Power Braking Controller replacement where the persistent-fault branch directs it

Included Links to OEM Source Material

Reference links are provided within the guide for:

  1. Complete OEM Diagnostic Manual
  2. Electronic Wiring Diagram
  3. Repair Manual

The linked OEM source documents are separate reference resources and are not included with this Diagnostic Guide.

BYD ATTO 3 / Yuan Plus P1ED500 AC Leakage Fault OEM Diagnostic Guide

$25

Diagnostic Guides

BYD ATTO 3 / Yuan Plus P1ED500 AC Leakage Fault OEM Diagnostic Guide

OEM diagnostic guide for 2022–2025 BYD ATTO 3 / Yuan Plus RHD EV covering P1ED500 AC leakage fault, with OBC fault-code diagnosis, charging-port and connector inspection, AC/DC charging socket insulation testing, > 2 MΩ specification and VDS software diagnosis.