Product: Instant Digital Download (PDF)
Diagnose Electric Power Steering (EPS) torque-sensor main/auxiliary/torque signal and supply-voltage faults (C1B9C23, C1B9C24, U016002, U015A38, and C1BA900) using the OEM guided diagnostic procedure.
Years Covered:
2022, 2023, 2024, 2025
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD — Electric Power Steering (EPS) / Torque Sensor
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
DTCs Covered
- C1B9C23 — Main/auxiliary/torque signals remain at low level continuously
- C1B9C24 — Main/auxiliary/torque signals remain at high level continuously
- U016002 — Abnormal duty cycle of primary/secondary/main+secondary torque signals
- U015A38 — Abnormal main/auxiliary/torque signal cycle / period
- C1BA900 — Abnormal supply voltage of torque sensor
Diagnostic Coverage
- OEM electric power-steering safety and connector-testing precautions
- VDS power-steering DTC confirmation, ignition-cycle recheck, and intermittent-fault evaluation
- Torque-sensor wiring-harness and connector inspection for corrosion, damage, and bent pins
- DTC-specific signal and supply-voltage diagnostic focus table (C1B9C23, C1B9C24, U016002, U015A38, C1BA900)
- Consolidated Diagnostic Decision Summary table and OEM-directed harness/EPS controller replacement branches
Included Links to OEM Source Material
The guide includes reference links to:
- Complete OEM Diagnostic Manual
- Electronic Wiring Diagram
- Repair Manual
These are reference links to related OEM source material and are not bundled documents included with this Diagnostic Guide.