Product: Instant Digital Download (PDF)
Diagnose BYD ATTO 3 / Yuan Plus onboard-charger AC/DC voltage, current, hardware-protection and AC-output short-circuit faults using OEM diagnostic procedures for OBC fault confirmation, charging-source testing, data-stream checks, wiring and connector inspection, high-voltage fuse diagnosis and controller software checks.
Years Covered:
2022, 2023, 2024, 2025
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
DTCs Covered
- P157016 — Low AC Side Voltage
- P157017 — High AC Side Voltage
- P157219 — DC Side Overcurrent
- P157216 — Low DC Side Voltage
- P157217 — High DC Side Voltage
- P157B00 — AC Side Overcurrent
- P157C00 — Hardware Protection
- P157F11 — Short Circuit at AC Output Terminal
Diagnostic Coverage
- OEM high-voltage and electrical/control-module precautions
- More than 5-minute high-voltage capacitor-discharge waiting requirement where applicable
- OBC DTC confirmation, clearing and fault-code recheck using VDS
- OEM intermittent-fault diagnostic procedure
- AC charging power-supply and power-grid checks
- AC charging gun / charger inspection
- DC charging power-supply substitution and charging verification
- OBC data-stream checks
- AC-side low- and high-voltage fault diagnosis
- DC-side LLC and PFC low- and high-voltage fault diagnosis
- AC-side and DC-side overcurrent diagnosis
- Charging-port inspection for foreign objects, aging, deformation, burnout and breakage
- OEM wiring-harness and connector inspection procedure
- High-voltage fuse diagnosis for P157216 and P157217
- OEM fuse resistance and short-circuit testing procedure
- Approximately 0 Ω fuse-circuit short-circuit indication
- OL no-short-circuit indication, with OEM qualification for excessive load voltage
- Correct fuse current-rating requirements
- P157C00 onboard-charger hardware-protection diagnosis
- P157F11 AC-output short-circuit diagnosis
- Discharge-device substitution and verification
- Integrated intelligent front-wheel drive controller wiring-harness inspection
- VDS controller software update and identical-DTC recheck
- Guided OEM diagnostic decision sequences
- OEM-directed charging-source, charging-gun, charging-port, wiring-harness, discharge-device and controller actions
Included Links to OEM Source Material
Reference links are provided within the guide for:
- Complete OEM Diagnostic Manual
- Electronic Wiring Diagram
- Repair Manual
The linked OEM source documents are separate reference resources and are not included with this Diagnostic Guide.