Product: Instant Digital Download (PDF)
Diagnose BYD ATTO 3 / Yuan Plus power battery cell-voltage, battery imbalance, overcharge and deep-discharge faults using the OEM diagnostic procedures for BMS fault confirmation, individual cell-voltage evaluation, battery consistency assessment, balancing verification, software checks and guided diagnostic decisions.
Years Covered:
2022, 2023, 2024, 2025
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
DTCs Covered
- P1AC400 — Battery Severely Unbalanced
- P1A3522 — Excessively High Voltage of a Single Power Battery Cell
- P1A3622 — Generally High Voltage of Individual Power Battery Cells
- P1A3721 — Severe Low Voltage of a Single Power Battery Cell
- P2BA300 — Imbalance at the Bottom of the Power Battery
- P2B7400 — Power Battery Overcharge
- P2B9400 — Deep Discharge of Power Battery
Diagnostic Coverage
- OEM safety and electrical/control-module precautions
- VDS diagnostic prerequisites and required vehicle test conditions
- BMS fault-code confirmation, clearing and recheck procedures
- Battery and sampling-unit data-stream diagnosis
- Highest and lowest single-cell voltage comparison
- Battery consistency checks at 40%–60% SOC
- Greater than 0.09 V highest-to-lowest cell-voltage difference evaluation for P1AC400 and P2BA300
- Greater than 3.85 V maximum single-cell voltage evaluation for P1A3522 and P1A3622
- P1A3721 diagnostic procedure using the specified maximum single-cell voltage data item and greater than 3.85 V decision threshold
- Power battery self-balancing verification
- Full AC charge followed by one week of normal vehicle use for battery voltage-difference reassessment
- Integrated intelligent front-drive controller and battery actuation/sampling-unit software checks
- Start-switch OFF/ON fault-code recheck procedures
- Intermittent-fault review where directed by the diagnostic procedure
- Power battery overcharge and deep-discharge diagnosis
- Guided YES/NO diagnostic decision sequence
- OEM-directed power battery pack, controller and battery actuation/sampling-unit actions
Included Links to OEM Source Material
Reference links are provided within the guide for:
- Complete OEM Diagnostic Manual
- Electronic Wiring Diagram
- Repair Manual
The linked OEM source documents are separate reference resources and are not included with this Diagnostic Guide.
These are reference links to related OEM source material and are not bundled documents included with this Diagnostic Guide.