BYD ATTO 3 / Yuan Plus: B2AB997 B2AB573 B2ABC16 Electric A/C Compressor Electrical Diagnostic Guide BYD ATTO 3 / Yuan Plus: B2AB997 B2AB573 B2ABC16 Electric A/C Compressor Electrical Diagnostic Guide

BYD ATTO 3 / Yuan Plus: B2AB997 B2AB573 B2ABC16 Electric A/C Compressor Electrical Diagnostic Guide

diagnostic guides PDF #6268

0 Reviews | Purchase Below *

$25 USD

Visa Mastercard American Express Apple Pay

OEM diagnostic guide for 2022–2025 BYD ATTO 3 / Yuan Plus RHD EV covering B2AB997, B2AB049, B2AB149, B2AB249, B2AB41D, B2AB573, B2AB774, B2AB81C, B2ABB17, B2ABC16, and B2ABA1C electric A/C compressor electrical, load, startup, and power-supply faults, including OEM refrigerant pressure specifications (0.73–0.83 MPa, 1.47–1.67 MPa, 0.15–0.25 MPa), 20 bar / 20-minute leak-test criteria, and high-voltage fuse checks.   Click To Read More


There are no reviews yet.

Product: Instant Digital Download (PDF)
 
Diagnose electric A/C compressor load, current-sampling, motor phase, IGBT, internal-current, startup, rotation-speed, phase-voltage, and high-/low-voltage power-supply faults (B2AB997, B2AB049, B2AB149, B2AB249, B2AB41D, B2AB573, B2AB774, B2AB81C, B2ABB17, B2ABC16, and B2ABA1C) using the OEM guided diagnostic procedure and refrigerant test specifications.
 
Years Covered:
2022, 2023, 2024, 2025
 
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD — Electric A/C Compressor Controller
 
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
 

DTCs Covered

  1. B2AB997 — Excessive Load Fault
  2. B2AB049 — Current Sampling Circuit Fault
  3. B2AB149 — Motor Phase Loss Fault
  4. B2AB249 — IPM IGBT Fault
  5. B2AB41D — Excessive Internal Current Fault
  6. B2AB573 — Startup Failure Fault
  7. B2AB774 — Abnormal Rotation Speed Fault
  8. B2AB81C — Abnormally High Phase Voltage Fault
  9. B2ABB17 — High-Voltage Side Voltage Overvoltage Fault
  10. B2ABC16 — Low Voltage on High-Voltage Side Fault
  11. B2ABA1C — Internal Low-Voltage Power Supply Fault

Diagnostic Coverage

  • OEM high-voltage isolation and pressurized refrigerant safety precautions
  • Electric-compressor DTC confirmation and intermittent-fault evaluation
  • Shared internal compressor electrical fault matrix (B2AB049, B2AB149, B2AB249, B2AB774, B2AB81C, B2ABB17, B2ABA1C)
  • High-voltage side low-voltage fuse inspection (B2ABC16 and B2AB573)
  • Excessive load (B2AB997), excessive internal current (B2AB41D), and startup failure (B2AB573) fault isolation
  • Cooling-fan operation, condenser contamination, and blocked A/C line checks
  • OEM refrigerant pressure specifications: 0.73–0.83 MPa (Cooling OFF), 1.47–1.67 MPa (High-pressure side Cooling ON), and 0.15–0.25 MPa (Low-pressure side Cooling ON)
  • OEM 20 bar / 20-minute A/C refrigerant leak-test procedure
  • Consolidated Test-Specification Summary table and OEM-directed repair/replacement branches
Included Links to OEM Source Material
The guide includes reference links to:
  1. Complete OEM Diagnostic Manual
  2. Electronic Wiring Diagram
  3. Repair Manual
These are reference links to related OEM source material and are not bundled documents included with this Diagnostic Guide.
BYD ATTO 3 / Yuan Plus: P1A0C00 P2B7100 P2B7000 BIC Voltage Sampling Fault OEM Diagnostic Guide

$25

Diagnostic Guides

BYD ATTO 3 / Yuan Plus: P1A0C00 P2B7100 P2B7000 BIC Voltage Sampling Fault OEM Diagnostic Guide

OEM diagnostic guide for 2022–2025 BYD ATTO 3 / Yuan Plus RHD EV covering P1A0C00, P1A0D00, P1A0E00, P1A0F00, P1A1000, P1A1100, P1A1200, P1A1300, P2B7100, and P2B7000 Battery Information Collector (BIC1–BIC8) voltage-sampling abnormalities and severe/general voltage-sampling open-circuit faults, including VDS battery performance/sampling verification and OEM replacement branches.