Format: Instant Digital Download (PDF)
Diagnose DC-DC converter high-voltage and low-voltage side voltage and current faults, internal hardware failure, overtemperature, and DC output positive-terminal open-circuit faults (P1EC000, P1EC100, P1EC600, P1EC200, P1EC300, P1EC400, P1EC700, P1EE000, and P1ED400) using the OEM guided diagnostic procedure, circuit test specifications, and full-page connector terminal views.
Years Covered:
2022, 2023, 2024, 2025
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD — DC-DC Converter / Low-Voltage Power Supply
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
DTCs Covered
- P1EC000 — Excessively high voltage on the high-voltage side during voltage reduction
- P1EC100 — Low voltage on the high-voltage side during voltage reduction
- P1EC600 — Excessive current on the high-voltage side during voltage reduction
- P1EC200 — Excessively high voltage on the low-voltage side during voltage reduction
- P1EC300 — Low voltage on the low-voltage side during voltage reduction
- P1EC400 — Excessive current on the low-voltage side during voltage reduction
- P1EC700 — Hardware failure during voltage reduction
- P1EE000 — DC Overtemperature
- P1ED400 — DC Output Positive Terminal Open
Diagnostic Coverage
- OEM high-voltage isolation and electrical safety precautions
- DC-DC assembly DTC confirmation and intermittent-fault evaluation
- High-voltage side fault isolation (P1EC000, P1EC100, P1EC600): OK-gear verification, VDS power-domain bus voltage check, and high-voltage load fuse inspection
- Low-voltage side fault isolation (P1EC200, P1EC300, P1EC400): 12V battery condition/status checks and controller software verification
- DC-DC hardware failure (P1EC700) and overtemperature (P1EE000) cooling-system checks: coolant level, VDS active water-pump mode, and VDS active cooling-fan mode
- Detailed circuit diagnosis for P1ED400 DC output positive-terminal open circuit: 11–14 V controller power supply, front-compartment fuse checks, < 1 Ω harness continuity, and < 1 Ω controller ground resistance
- Full-Page OEM Connector Identification Diagrams: Highlighted terminal pinouts for Front Compartment Fuse Box connectors B1C and B1D
- Consolidated Test & Decision Summary table and OEM-directed replacement branches
Included Links to OEM Source Material
The guide includes reference links to:
- Complete OEM Diagnostic Manual
- Electronic Wiring Diagram
- Repair Manual
These are reference links to related OEM source material and are not bundled documents included with this Diagnostic Guide.