BYD ATTO 3 / Yuan Plus: C002192 C056B00 C053E00 Brake Booster Pressure & Sensor OEM Diagnostic Guide BYD ATTO 3 / Yuan Plus: C002192 C056B00 C053E00 Brake Booster Pressure & Sensor OEM Diagnostic Guide BYD ATTO 3 / Yuan Plus: C002192 C056B00 C053E00 Brake Booster Pressure & Sensor OEM Diagnostic Guide

BYD ATTO 3 / Yuan Plus: C002192 C056B00 C053E00 Brake Booster Pressure & Sensor OEM Diagnostic Guide

diagnostic guides PDF #6267

0 Reviews | Purchase Below *

$25 USD

Visa Mastercard American Express Apple Pay

OEM diagnostic guide for 2022–2025 BYD ATTO 3 / Yuan Plus RHD EV covering C002192, C056B00, C053F00, C053E00, C053D00, C054100, C054200, and C054300 brake booster hydraulic-pressure and pressure-sensor circuit faults, including B03 and B1C OEM connector face pinouts, F1/30 & F1/44 (60A) fuse checks, and < 1 Ω / 11–14 V specifications.   Click To Read More


There are no reviews yet.

Product: Instant Digital Download (PDF)
 
Diagnose brake-booster hydraulic-pressure and pressure-sensor faults (C002192, C056B00, C053F00, C053E00, C053D00, C054100, C054200, and C054300) using the OEM guided diagnostic procedure, circuit test specifications, and full-page connector terminal views.
 
Years Covered:
2022, 2023, 2024, 2025
 
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD — Intelligent Power Braking System
 
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
 
DTCs Covered
  1. C002192 — Hydraulic pressure in the brake booster module pipeline is below normal levels
  2. C056B00 — Fault in the pressure sensor of the brake booster module
  3. C053F00 — Excess voltage in Pressure Sensor Circuit A
  4. C053E00 — Low voltage in Pressure Sensor Circuit A
  5. C053D00 — Abnormal signal from Pressure Sensor B
  6. C054100 — Abnormal signal from Pressure Sensor B
  7. C054200 — Low voltage in Pressure Sensor Circuit B
  8. C054300 — Excess voltage in Pressure Sensor Circuit B
Diagnostic Coverage
  • OEM braking-system safety and electrical precautions
  • Electro-hydraulic braking DTC confirmation and intermittent-fault evaluation
  • Persistent-fault replacement branches for C002192, C056B00, C053F00, C053D00, C054100, and C054300
  • Deep circuit diagnosis for C053E00 and C054200 low-voltage sensor faults
  • Front-compartment fuse box inspection for F1/30 (60A) and F1/44 (60A)
  • Controller ground-circuit resistance testing (< 1 Ω at B03-1 and B03-30)
  • Constant power-supply voltage testing (11–14 V at B03-14 and B03-46)
  • IG1 harness continuity testing (< 1 Ω between B03-14 ↔ B1C-4 and B03-46 ↔ B1C-1)
  • Full-Page OEM Connector Identification Diagrams: Highlighted terminal pinouts for Front Compartment Fuse Box B1C and Intelligent Power Braking Controller B03
Included Links to OEM Source Material
The guide includes reference links to:
  1. Complete OEM Diagnostic Manual
  2. Electronic Wiring Diagram
  3. Repair Manual
These are reference links to related OEM source material and are not bundled documents included with this Diagnostic Guide.
BYD ATTO 3 / Yuan Plus: P1A0C00 P2B7100 P2B7000 BIC Voltage Sampling Fault OEM Diagnostic Guide

$25

Diagnostic Guides

BYD ATTO 3 / Yuan Plus: P1A0C00 P2B7100 P2B7000 BIC Voltage Sampling Fault OEM Diagnostic Guide

OEM diagnostic guide for 2022–2025 BYD ATTO 3 / Yuan Plus RHD EV covering P1A0C00, P1A0D00, P1A0E00, P1A0F00, P1A1000, P1A1100, P1A1200, P1A1300, P2B7100, and P2B7000 Battery Information Collector (BIC1–BIC8) voltage-sampling abnormalities and severe/general voltage-sampling open-circuit faults, including VDS battery performance/sampling verification and OEM replacement branches.  

BYD ATTO 3 / Yuan Plus: B2AB997 B2AB573 B2ABC16 Electric A/C Compressor Electrical Diagnostic Guide

$25

Diagnostic Guides

BYD ATTO 3 / Yuan Plus: B2AB997 B2AB573 B2ABC16 Electric A/C Compressor Electrical Diagnostic Guide

OEM diagnostic guide for 2022–2025 BYD ATTO 3 / Yuan Plus RHD EV covering B2AB997, B2AB049, B2AB149, B2AB249, B2AB41D, B2AB573, B2AB774, B2AB81C, B2ABB17, B2ABC16, and B2ABA1C electric A/C compressor electrical, load, startup, and power-supply faults, including OEM refrigerant pressure specifications (0.73–0.83 MPa, 1.47–1.67 MPa, 0.15–0.25 MPa), 20 bar / 20-minute leak-test criteria, and high-voltage fuse checks.