Product: Instant Digital Download (PDF)
Diagnose battery cooling, internal circulation, battery heating and variable-speed cooling-water-pump faults using the OEM diagnostic procedures, including power-domain fault confirmation, right body domain controller network checks, thermal-management controller software diagnosis and water-pump PWM circuit testing.
Years Covered:
2022, 2023, 2024, 2025
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
DTCs Covered
- P1ADE00 — Battery Cannot Be Cooled Due to Air Conditioning System Failure
- P1ADF00 — Battery Internal Circulation Unavailable Due to Air Conditioning System Failure
- P1AE000 — Battery Heating Unavailable Due to Air Conditioning System Failure
- P1D7E00 — Cooling Water Pump Stalled or Overcurrent Shutdown Fault
Diagnostic Coverage
- OEM high-voltage and battery thermal-management safety precautions
- VDS power-domain DTC confirmation, clearing and fault-code recheck
- Intermittent-fault diagnosis
- P1ADE00 battery-cooling availability diagnosis
- P1ADF00 battery internal-circulation availability diagnosis
- P1AE000 battery-heating availability diagnosis
- Right body domain controller network checks
- P1ADE00 Right Body Domain Controller CAN Off — Energy Network diagnostic handoff
- P1ADF00 / P1AE000 Right Body Domain Controller CAN Off — Power Network diagnostic handoff
- Integrated intelligent front-wheel drive controller software update and DTC recheck
- Integrated intelligent front-wheel drive controller replacement where the applicable DTC remains
- P1D7E00 variable-speed cooling-water-pump diagnosis
- Variable-speed water-pump inspection for abnormality, damage or rust
- B41-2 — PWM Feedback Signal
- B41-4 — PWM Control Signal
- BK45(A)-16 — PWM Feedback Signal
- BK45(A)-5 — PWM Control Signal
- Water-pump PWM circuits to ground: > 10 kΩ
- Water-pump PWM circuits to power supply: > 10 kΩ
- B41-2 → BK45(A)-16 PWM feedback continuity: < 1 Ω
- B41-4 → BK45(A)-5 PWM control continuity: < 1 Ω
- Water-pump wiring-harness inspection and repair/replacement decision paths
- Variable-speed water-pump replacement where the applicable inspection fails
- Exact B41 and BK45(A) connector-terminal references retained where separate OEM connector-face illustrations are unavailable
Included Links to OEM Source Material
Reference links are provided within the guide for:
- Complete OEM Diagnostic Manual
- Electronic Wiring Diagram
- Repair Manual
The linked OEM source documents are separate reference resources and are not included with this Diagnostic Guide.