Product: Instant Digital Download (PDF)
Diagnose charging and DC-DC communication faults using the OEM diagnostic procedures for the on-board charger, Battery Management System, DC system, CCS communication converter and DC charging equipment, including CAN circuit testing, controller-network checks, software diagnosis and OEM-directed fault-isolation paths.
Years Covered:
2022, 2023, 2024, 2025
Vehicle Specification:
SC2E, e-Platform 3.0 400V, FWD, RHD
Excludes:
2026+ BYD ATTO 3 Evo, 800V RWD/AWD architecture, 74.8 kWh Cell-to-Body battery pack, and Left-Hand Drive (LHD) variants.
DTCs Covered
- U029787 — Communication Fault with On-Board Charger
- U029800 — Battery Manager and DC Communication Fault
- U029F87 — Communication Fault with OBC
- U029887 — Communication Fault with DC
- U014B87 — Communication Fault with DC Charging Cabinet
Diagnostic Coverage
- OEM high-voltage, charging and CAN-network safety precautions
- VDS DTC confirmation, clearing and fault-code recheck
- Intermittent/sporadic communication-fault diagnosis
- U029787 on-board-charger communication diagnosis
- U029800 battery-manager/DC communication diagnosis
- U029F87 OBC communication diagnosis
- U029887 DC communication diagnosis
- U014B87 DC charging-cabinet communication diagnosis
- Charging-network B77 CCS communication converter circuit diagnosis
- B77-10 — Charging Network CAN-H
- B77-8 — Charging Network CAN-L
- BK45(A)-19 — Charging Network CAN-H
- BK45(A)-25 — Charging Network CAN-L
- Charging-network CAN circuits to ground: > 10 kΩ
- Charging-network CAN circuits to power supply: > 10 kΩ
- B77-10 → BK45(A)-19 continuity: < 1 Ω
- B77-8 → BK45(A)-25 continuity: < 1 Ω
- U029800 power-battery B5K1 circuit diagnosis
- B5K1-4 → BK45(A)-1 drive-independent power-supply circuit
- B5K1-8 → BK45(A)-16 battery-system CAN-H circuit
- B5K1-9 → BK45(A)-13 battery-system CAN-L circuit
- B5K1 power/CAN circuits to ground and power source: > 10 kΩ
- B5K1-to-BK45(A) continuity testing: < 1 Ω
- Wiring-harness and connector inspection with repair/replacement decision paths
- Integrated intelligent front-wheel drive controller software check/update and DTC recheck
- CCS communication converter software check/update where applicable
- Battery execution and sampling unit software check/update for U029800
- CCS Communication Converter CAN Off — Energy Network diagnostic handoff from the alternate U029F87 OEM path
- Both OEM U029F87 diagnostic paths retained where the source provides differing procedures
- External DC charging pile/cabinet consideration for U014B87
- OEM-directed controller, CCS communication converter and battery execution/sampling unit replacement paths where applicable
- Exact B77, B5K1 and BK45(A) terminal references retained where usable OEM connector-face illustrations are unavailable
Included Links to OEM Source Material
Reference links are provided within the guide for:
- Complete OEM Diagnostic Manual
- Electronic Wiring Diagram
- Repair Manual
The linked OEM source documents are separate reference resources and are not included with this Diagnostic Guide.